1
WITH THE ENGINE RUNNING, PUSH
2
HOLD MOLDBOARD CONTROL HANDLE IN
CLUTCH HANDLE TO ENGAGE POSITION.
"L" POSITION.
NOTE: WHEN
THE
MOLDBOARD
CONTROL
HANDLE IS IN FHE FLOAT -F" POSITION, OIL
PRESSURE HAS
BEEN DIVERTED FROM THE
CYLINDERS.
THE RESULT
IS THAT THE
MOLDBOARD CAN RIDE ON THE GROUND WITH
ONLY ITS WEIGHT AS DOWNWARD PRESSURE.
3
WHEN
MOLDBOARD
TOUCHES
GROUND, MOVE CONTROL HANDLE TO "F"
POSITION.
AT 19747
Figure E-4. Operating bulldozer in float postion.
AE-6
