references to paragraphs in this appendix which
E-19. Tools and Equipment
describe the use of the tool. Table E-1 is not to be used
E-20. Special. Special tools and equipment designed
for requisitioning replacements.
Special tools for
for organizational maintenance, repair, and general use
organizational maintenance are listed in Section VII,
peculiar to this material are listed in table E-1 and
which is the authority for requisitioning replacements.
illustrated in figure E-6.
Table E-1. Special Tools and Equipment - Organizational Maintenance
Item
Identifying
Reference
Use
Number
s Fig.
Para.
Tool, clutch adjusting (carried on engine shroud
7953545
access door)
Figure E-6. Special tools and equipment for organizational maintenance.
The peculiar daily preventive-maintenance service
E-21.
Preventive
Maintenance
Checks
and
Services.
each day the bulldozer is operated. For common daily
E-22. The operator and crew are personally
preventive-maintenance service routines, refer to
responsible for assigned vehicles. Squad, section, and
platoon leaders are charged with supervisory
responsibility for vehicles pertaining to their command.
Table E-2. Daily Preventive - Maintenance Services
(Operative and Crew)
Before
Intervals
After
Procedure
Operation
During
Operation
Operation
GENERAL SERVICE OPERATIONS
X
X
Oil. Check the amount of oil in the reservoir (fig. E-2). Add oil as neces-
sary.
E-23. Troubleshooting.
E-25. Qualification Procedure.
E-24. The malfunction approach consists of referring
to the peculiar troubleshooting table (table E-3) and
is used for the test approach method of troubleshooting
selecting the probable cause of a particular malfunction.
for the early model M8A3 bulldozer. For listing of
common qualification procedure, refer to table E-4.
indications which may occur during inspection and
operation of the vehicle. It provides a list of probable
causes of the malfunction, corrective actions to be
taken.
AE-8
