PRELIMINARY PROCEDURE:
OPEN REAR GRILLE DOORS AND REMOVE
TRANSMISSION SHROUD (TM9-2350-224-20)
REMOVE/INSTALL SCREW, LOCKWASHER
AND
REMOVE/INSTALL NUT SECURING
ROD
END
NUT FROM/TO YOKE ASSEMBLY.
BEARING FROM/TO SUPPORT.
REMOVE/INSTALL COTTER PIN AND CLEVIS PIN.
REMOVE/INSTALL
TWO
SCREWS
AND
LOCKWASHERS SECURING SUPPORT FROM/TO
RIGHT ANGLE DRIVE.
REMOVE/INSTALL YOKE ASSEMBLY.
REMOVE/INSTALL SUPPORT.
AT 19757
Figure E-14. Removal or installation of hydraulic clutch support and yoke assembly.
AE-18
