TM 9-2590-506-13&P
5-11. LEVEL CONTROL SWITCH MAINTENANCE
INSTRUCTIONS (Continued)
d. Installation.
(1) Feed lead wires through coupling (4) and
nipple (5) and install level control switch
(3) in coupling.
Tighten level control
switch to 90 to 100 pound-inches.
(2) Using strap wrench, screw shield (1) into
housing (2).
(3) Refer to para 5-10.d and install electrical
receptacle.
c. Checkout. Refer to table 5-1, item 1, LEVEL
CONTROL
SWITCH
INOPERATIVE
MAINTENANCE INSTRUCTIONS, for level
control switch checkout procedure.
5-12. LATCH COVER LEVER MAINTENANCE INSTRUCTIONS
This task covers:
a. Removal
d. Repair
b. Cleaning
e. Installation
c. Inspection
INITIAL SETUP
Tools, Special Tools and Test Equipment
Materials/Parts
Drive Pin Punch, 1/4-inch diameter (2
Lever packing
required)
Personnel Required
Socket Handset Key, 3/16-inch
Two
Torque Wrench, 3/8-inch drive, 100
pound-inches
Condition Description
Socket, Socket Handset Wrench, 3/8-
None
inch drive, 3/1 6-inch
Special Environmental Conditions
None
TA255021
5-12
