TM 9-2590-506-13&P
5-12. LATCH COVER LEVER
MAINTENANCE
INSTRUCTIONS (Continued)
NOTE
There are two identical latch cover
The following procedures
describe the maintenance of one of
the latch cover levers.
a. Removal.
(1) Place the lever (1) in UNLOCK position
and insert 1/4-inch diameter punch in hole
B of latch (6).
(2) Remove three socket head screws (2),
and then remove latch cover (3).
WARNING
Use extreme care while removing pin
from hole B. The latch is spring
loaded and will move up quickly and
can cause injury to personnel.
(3) Remove 1/4-inch diameter punch from
hole B.
5-13
