ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
b. Installation
This task covers:
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Top cover removed (para. 4-21)
General Mechanic's Tool Kit (Item 1, Appendix B)
Materials/Parts
Rags, Wiping (Item 7, Appendix D)
Solvent, Drycleaning (Item 8, Appendix D)
WARNING
Do not smoke or use an open flame in the vicinity of gasoline vapors.
(1) Loosen fitting nut (1).
(2) Loosen fitting nut (2) and remove fuel line (3).
(3) Remove fittings (4).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).
(4) Clean fuel line (3) with drycleaning solvent and dry thoroughly.
(5) Inspect fuel line (3) and replace if fitting nuts (1) and (2) are stripped or fuel line (3) is dented or
otherwise damaged.
(6) Inspect fittings (4) and replace if damaged.
(1) Install fittings (4).
(2) Install fuel line (3) and tighten fitting nuts (1) and (2).
