ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
b. Installation
a. Removal
This task covers:
INITIAL SETUP
Equipment Condition
Tools
Air cleaner removed (para. 4-16).
General Mechanic's Tool Kit (Item 1, Appendix B)
(1) Unsnap two clips (1) and remove top cover (2).
(2) Unplug wiring harness connector (3) from inside of right hand shroud (4).
(3) Remove alternator connector (5) from outside of right hand shroud (4).
(4) Remove four screws (6) and remove connector (7) from right hand shroud (4).
(5) Loosen connector nut (8) and remove high tension cable (9).
(6) Loosen connector nut (10) and remove high tension cable (11 ).
(7) Remove grommet (12) and remove high tension cables (9) and (11) from right hand shroud (4).
(8) Remove wiring harness clips (13) from right hand shroud (4).
(9) Tag and disconnect wiring from starter solenoid (14) and automatic choke solenoid (15).
(10) Remove six assembled screws and washers (16) and remove right hand shroud (4).
(11) Loosen connector nut (17) and remove high tension cable (18).
(12) Loosen connector nut (19) and remove high tension cable (20).
(13) Remove grommet (21) and remove high tension cables (18) and (20) from left hand shroud (22).
(14) Remove connectors (23) and (24) from left hand shroud (22).
(15) Remove wiring harness clips (13) from left hand shroud (22).
(16) Remove four assembled screws and washers (25) and remove left hand shroud (22).
(17) Remove spring (26) and remove right hand cylinder baffle (27).
(18) Remove spring (28) and remove right hand cylinder baffle (29).
(19) Remove spring (30) and remove left hand cylinder baffle (31).
(20) Remove spring (32) and remove left hand cylinder baffle (33).
(21) Inspect all items and replace damaged or missing items.
