Air Breather Reed and Support.

ARMY TM 9-2805-259-14

AIR FORCE TO 38G2-89-54

NAVY NAVFAC P-8-615-14E

4-54. Air Breather Reed and Support.

b. Installation

This task covers:

a. Removal

INITIAL SETUP

Equipment Condition

Tools

Breather tube removed (para. 4-18).

General Mechanic's Tool Kit (Item 1, Appendix B)

Materials/Parts

Rags, Wiping (Item 7, Appendix D)

Solvent, Drycleaning (Item 8, Appendix D)

a. Removal. (figure 4-52).

(1) Remove two assembled screws and washers (1) and remove air breather reed support (2) and reed (3).

WARNING

Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and

property. Avoid repeated and prolonged skin contact. Do not use near open flame or

excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).

(2) Clean all items with drycleaning solvent, and dry thoroughly.

(3) Inspect air breather reed support (2) and reed (3) and replace if cracked or otherwise damaged.

Installation. (figure 4-52)

Install reed (3) and air breather reed support (2) and secure with two assembled screws and

washers (1).