ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
This task covers:
a. Test
b. Removal
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit (Item 1, Appendix B)
Multimeter (NSN 6625-01-139-2512)
Top cover removed (para. 4-21).
(Item 2, Appendix B)
Perform end to end continuity test on wiring harness (1). (Refer to figure 4-54.)
(1) Tag and remove wiring harness leads from starter solenoid (2), oil shutoff switch (3), oil pressure
transmitter (4), magneto (5), regulator-rectifier connector (6) and alternator connector (7).
(2) Remove wiring harness (1) from clips (8).
(3) Remove four screws (9) and remove wiring harness (1).
(1) Install wiring harness (1) and secure with four screws (9) and washers (10).
(2) Install wiring harness (1) in clips (8).
(3) Install wiring harness leads and connectors as tagged.
