ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
(13) Replace all kit items. If any other parts are worn or damaged, replace carburetor.
(14) Install fuel metering tube (29) and seal washer (30).
(15) Install idle speed jet (27) and spring (28).
(16) Install two bearings (26), rubber seal (25) and seal retainer (24).
(17) Install throttle shaft (22).
(18) Install throttle plate (21) and secure with two screws (20).
(19) Install cap plug (23).
(20) Install throttle lever (19) and secure with nut (17) and washer (18).
(21) Install two felt seals (16), choke shaft (15) and retaining washer (14).
(22) Install choke plate (13) and secure with two screws (11) and washers (12).
(23) Install float valve seat (9) and gasket (10).
(24) Install gasket (8), float (5), spring (6), fuel valve (7) and pin (4).
(25) Turn carburetor (31) upside down and adjust float height to 0.20 in. (0.5 cm) above carburetor bottom by
gently bending tab resting on float valve (7).
(26) Install bowl (3) and secure with screw (1) and gasket (2).
