3.
Adjustable Work Support (AC-24). Used
when needed for honing large or bulky parts which
prevents operator fatigue by supporting the weight of the
part and absorbing the honing torque. The Connecting
Rod Tool Guide (Part No. ACB-20) is essentially the
same as the adjustable work support but is used in
production of connecting rods for industrial and
automotive use.
4.
Adjustable
Work
Stop
(ACH-61-
accessory item) (Point of attachment shown only). Limits
honing stroke and is principally used when honing blind
5.
Oil Flow Control with flexible honing oil
lines.
This control regulates flow of honing oil through
flexible line to the workpiece. A longer line set is available
for extremely long work flow condition (3 two foot sections
with couples-ACB-53). Actual flexible line set is available
(ACB-54) for normal dual holes (e.g. automobile pistons).
On most larger horizontal machines and some bench
machines both lines will retract into the machine when
desired.