TM 9-4110-246-14
TO 40R7-5-10-1
2. Check the equipment against the packing slip to see if the shipment is complete . Report all discrepancies in
accordance with the instructions of DA Pam 738-750.
3. Tighten all loose mounting hardware and replace damaged or missing parts. Inspect for clogged drain strainers .
Make certain all camlocks are in proper working condition . Check gasket panels on all panel assemblies for
4. Before placing any panel assembly in position, make certain all camlocks rotate freely and are rotated fully
counterclockwise . Remove all foreign material from camlock recesses and make sure hooks are not damaged
or bent . Lubricate as necessary.
3-7.
INSTALLATION INSTRUCTIONS.
A. TOOLS, TEST EQUIPMENT, AND MATERIALS REQUIRED FOR INSTALLATION.
Hex Wrench
Screwdriver, Cross Tip
Screwdriver, Flat Tip
Pocket Knife
B. PERSONAL REQUIRED . 4.
3-3