TM9-4110-254-14
c.
Assembly.
(1)
Install sleeving insulation (10) on resistor (11) wire leads
(2)
Crimp terminal lugs (12) on wire leads
d. Installation.
(1)
Using tags and wiring diagram (fig. 1-4), install resistor assembly (6), screw (9), lock washer (8) and screw (7)
Remove tags.
(2)
Close control panel (3). Install two new lock washers (2) and bolts (1).
Figure 4-17. Resistor R1 Assembly
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Connect power and put unit back into service.
4-49