TM 9-4110-254-14
c.
Installation.
(1) Install fuse block (9) and two screws (8).
(2) Using tags and wiring diagram (fig 1-4), install wire lead terminals (5), four lock washers (7), and screws (6)
Remove tags.
(3) Install two six amp fuses (4).
(4) Close control panel (3). Install two new lock washers (2) and bolts (1).
Figure 4-19. Fuses
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Connect power and put unit back into service.
4-53