TM 9-4110-254-14
4-31. REMOTE BULB THERMOSTAT S3 TESTING AND REPLACEMENT. - Continued
(7)
Slip clamp (13) over sensing bulb (14)
(8)
Install clamps (13) and (16), bolt (12), new lock washer (11) and new self locking nut (10).
(9)
Install sensing bulb bracket (9), two flat washers (8), new lock washers (7) and bolts (6)
(10) Install cover (5) and screw (4)
(11) Close control panel (3) Install two new lock washers (2) and bolts (1).
(12) Apply silicone RTV into grommets (24) to seal evaporator enclosure.
NOTE
FOLLOW-ON MAINTENANCE.
Unlatch and close control panel cover door
Close left side door.
Connect power and put unit back into service.
4-72