TM 9-4110-254-14
5-39. LEFT AND RIGHT SIDE DOOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts
Equipment Conditions
Lock Washers (8)
Refrigeration unit shut down (para 2-7) and power
1, Appendix G
disconnected
Rivets (48)
26, Appendix E
General Safety Instructions
WARNING
High voltage and exposed rotating parts are
used in the refrigeration unit. Personal injury
can result if power is connected
NOTE
Quantities given are for each door.
a. Removal.
(1)
Remove four bumpers (1).
(2)
Remove four bolts (2), lock washers (3), and two barrel bolt clips (4). Discard lock washers.
(3)
Using drill bit slightly smaller than rivet diameter, drill through twelve rivets (5) and remove door (6)
(4)
Drill through twelve rivets (7) and remove two hinges (8).
b. Installation.
(1)
Install two hinges (8) onto door (6) and secure with twelve rivets (7)
(2)
Install door (6) and secure with twelve rivets (5)
(3)
Install two barrel bolt clips (4) and secure with four new lock washers (3) and bolts (2).
(4)
Install four bumpers (1).
5-86
