TM 9-4110-256-14
(2) Attach the sling(s) (4) to the lifting rings (5).
CAUTION
Failure to use a spreader bar or two point lifting device, such as a fork lift, can cause damage to
the condenser frame when lifted.
(3) If a single point lifting device is being used, install the spreader bar onto the sling(s) (4) at approximate
mid-way point.
WARNING
The refrigeration unit can swing and move when lifted. Personal injury can result if standing
near unit when it is lifted.
(4) Connect a hoist or similar lifting device to the sling(s) (4) and lift the refrigeration unit.
(5) Carefully position the refrigeration unit into the refrigerator enclosure opening.
Figure 4-2. Installation
4-3
