TM 9-4110-256-14
5-2.
CONTROL PANEL COVER REPAIR. - Continued
(2) Soften and remove old adhesive and gasket (1), (2), or (3) residue, using acetone or methyl-ethyl ketone (MEK)
and a stiff brush.
(3) Fabricate new gasket (1), (2), or (3) per appendix F.
(4) Be sure that the attaching surface of the control panel cover (4) is clean and free of paint and old adhesive
material.
(5) Coat the mating surfaces of the control panel cover (4) and gasket (1), (2), or (3) with adhesive. Let both
surfaces air dry until adhesive is tacky, but will not stick to fingers.
(6) Starting with an end, carefully press gasket (1), (2), or (3) onto the control panel cover (4). Press firmly overall to
ensure complete contact.
NOTE
FOLLOW-ON MAINTENANCE:
Install control panel cover (para 4-16).
5-4
