TM 9-4110-256-14
b.
Installation.
(1)
If removed, install bracket (6), three new lock washers (8) and bolts (7).
NOTE
Do not remove dehydrator protective caps until just before installation. This will minimize the
risk of contaminating the dehydrator. Be sure to observe flow direction noted during removal.
(2)
Install new dehydrator (5), clamp (4), bolt (3), and new self locking nut (2).
(3)
Tighten two flare nuts (1).
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Leak check (para 5-11), evacuate (para 5-12), and charge (para 5-13) the refrigeration system.
5-33
