TM 9-4110-258-13
c.
Installation..
(1) Install indicator base (3), lock washer (9), and nut (8).
(2) Using tags and wiring diagram (fig. 1-4), install wire lead terminals (6) and two screws (7). Remove tags.
(3) Close control box cover (5). Install six screws (4).
NOTE
The red indicator cap is used on the DEFROST IN PROGRESS indicator and the green indicator
caps are used on the REFRIGERATOR CYCLE ON and HEATING CYCLE ON indicators.
(4) Install lamp (2) and indicator cap (1).
Figure 4-13. Indicator/Lamp
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Connect power and put unit back into service.
4-41
