TM 9-4110-258-13
4.25 MOTOR STARTER K1 TESTING. REPAIR. AND REPLACEMENT. - Continued
(4) Set overload adjustment (FLA) dial to A position and (RESET) adjustment dial to M position.
(5) Install motor starter (4), flat washer (13), new lock washer (12), and bolt (11).
(6) Install flat washer (10), new lock washer (11), and screw (8).
(7) Using tags and wiring diagram (fig. 1-4), install wire leads (7). Remove tags.
(8) Install defrost timer (para 4.29).
(9) Close control box cover (2). Install six screws (1).
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Connect power and put unit back into service.
4-56
