TM 9-4110-258-13
4.45
BARREL BOLTS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
General Safety Instructions:
WARNING
disconnected.
Materials/Parts:
High voltage and exposed rotating parts are
used in the refrigeration unit. Personal injury
Lock, Washer (6)
can result if power is connected.
a. Removal.
(1) Remove four bolts (1), lock washers (2), and barrel bolt (3). Discard lock washers.
(2) Remove two bolts (4), lock washers (5), and barrel bolt clip (6). Discard lock washers.
b. Installation.
(1) Install barrel bolt clip (6), two new lock washers (5), and bolts (4).
(2) Install barrel bolt (3), four new lock washers (2), and bolts (1).
Figure 4-39. Barrel Bolts
NOTE
FOLLOW-ON MAINTENANCE:
Connect power and put unit back into service.
4-99