TM 9-4110-258-13
b. Installation.
(1) Fabricate the required gasket(s) (appendix F).
(2) Seal the cut surface(s) (20) of gasket(s) with silicone RTV.
(3) Install left inside gasket (18), one each gasket retainer strips (16) and (17), and six screws (15). Repeat for right
inside gasket (19).
(4) Install left outside gasket (13), one each gasket retainer strips (11) and (12), and seven screws (10). Repeat for
right outside gasket (14).
(5) Install top inside gasket (8), two gasket retainer strips (7), and eight screws (6). Repeat for bottom inside gasket
(9).
(6) Install top outside gasket (4), one each gasket retainer strips (2) and (3), and nine screws (1). Repeat for bottom
outside gasket (5).
(7) Seal the seam(s) (21) of gasket(s) with silicone RTV.
NOTE
FOLLOW-ON MAINTENANCE:
Install refrigeration unit onto refrigerator enclosure (para 4.7).
Connect power and put unit back into service.
4-98
