TM 9-4110-258-13
5.35 PRESSURE GAGE (HIGH) REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Lock Washers (3)
Refrigeration system discharged (para 5.8).
6, Appendix G
Left side door open.
Anti-Seize Tape
22, Appendix E
a. Removal.
(1) Remove three bolts (1), lock washers (2), and pressure gage (3) as far as copper tubing (4) will allow.
Discard lock washers.
(2) Loosen flare nut (5) and move copper tubing (4) over to one side being careful not to bend or kink tubing.
(3) Remove coupling (6).
Figure 5-30. Pressure Gage (High)
5-66
