TM 9-4110-258-13
5.38 EVAPORATOR COIL REPLACEMENT. - Continued
b. Installation.
(1) Install evaporator fan shroud (14), ten flat washers (18), and bolts (17).
WARNING
Coil fins are sharp and can cut hands or fingers. Wear gloves to prevent personal injury when
handling coil.
(2) Install evaporator coil (16) and braze three fittings (15) onto evaporator coil (para 5.10).
(3) Install 10 flat washers (12) and bolts (11).
(4) Be sure sensing bulbs (10) are in clamps (9) then aline clamps and install flat washer (8), new lock washer
(7), and bolt (6).
(5) Aline shroud (5) and install 17 flat washers (4), new lock washers (3), and bolts (2).
(6) Using tags and wiring diagram (fig. 1-4), install wire leads (1). Remove tags.
NOTE
FOLLOW-ON MAINTENANCE:
Install temperature switch (para 4.43).
Install expansion valve (para 5.37).
Install top panel (para 4.15).
Install side panels (para 4.16).
Install and adjust V-belt (para 4.31).
Replace dehydrator (para 5.15).
Leak check (para 5.11), evacuate (para 5.12), and charge (para 5.13) the refrigeration system.
5-74
