TM 9-4110-258-13
(5) Tag capillary tubes (17) and loosen five flare nuts (18) from tees (19) and flare nut from elbow (20).
Carefully pull tubes away from tees and elbow being careful not to bend or kink tubes.
(6) Remove three tees (19) and elbow (20).
(7) Remove two caps and chains (21) and elbows (22).
(8) Remove four screws (23). Pull two service valves (24) away from compressor (5) being careful not to
bend or kink tubing 25). Remove two service valve gaskets (26) and suction screen (27). Discard gaskets.
WARNING
Compressor weight exceeds 290 lb (132 kg). Use appropriate lifting device to avoid personal
injury.
(9) Remove four locknuts (28), mounting spacers (29), and compressor (5). Discard locknuts.
(10) Remove four mounting springs (30).
(11) Remove four nuts (31), flat washers (32), screws (33), lock washers (34), and flat washers (35). Discard
lock washers.
(12) De-braze two service valves (24) from tubing (25) (para 5.10).
d. Disassembly.
NOTE
Disassemble only as necessary to replace defective component(s).
(1) Remove eight screws (6), cylinder head (7), cylinder head gasket (8), valve plate assembly (9), two reed
valves (10), and valve plate gasket (11). Discard gaskets.
(2) Remove four screws (36) and terminal box (37).
(3) Remove three screws (38), fused cluster terminal (39), and fused cluster seal (40). Discard fused cluster
terminal and seal.
(4) Remove 10 screws (41), terminal plate (42), and terminal mounting plate gasket (43). Discard gasket.
(5) Remove two screws (44) and protector (45).
(6) Remove three screws (46), sight glass (1), and seal (47). Discard seal.
(7) Remove six screws (48), oil pump (49), and oil pump gasket (50). Discard gasket.
(8) Remove two screws (51), and mounting foot plate (52).
(9) Remove 27 screws (53), bottom plate (54), and bottom plate gasket (55). Discard gasket.
5-79