TM9-4120-370-14
TO35E9-229-1
1-5.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
-
Command decisions, according to tactical situation, will determine when destruction of the air conditioning unit will be ac-
complished. A destruction plan will be prepared by the using organization, unless one has been prepared by higher author-
ity. For general destruction procedures for this equipment, refer to TM 750-244-3, Procedures for Destruction of Equip-
ment to Prevent Enemy Use.
1-6. PREPARATION FOR STORAGE OR SHIPMENT
Contact unit maintenance for air conditioning unit preparation for storage or shipment. (Chapter 4, Section Vll)
Section Il. EQUIPMENT DESCRIPTION
1-7.
PURPOSE, CAPABILITIES, AND FEATURES
Purpose of Air Conditioner. The Air Conditioner is designed to ventilate, cool or heat, and to filter air in rooms "
a.
or enclosures.
b. Capabilities and features
(1)
Provides a maximum of 36,000 BTU/HR of cooling or 28,600 BTU/HR of heating.
(2)
Has two stages of heat.
Provides source of filtered outside (fresh) ventilation air.
(3)
(4)
Is self contained in a single cabinet that is ideally suited for van, shelter, or room installations.
Operates in environmental conditions from tropic to arctic.
(5)
Is fully portable.
(6)
(7)
Has alternate power input connection locations to provide for a variety of installations.
(8)
Designed for low-noise level operation.
(9)
c.
Special features
(1) The control panel may be removed from the unit and remote mounted.
NOTE
When control panel is remote mounted, a block off panel must be used on the air condi-
tioner. The block off panel must be ordered separately. Interconnecting cables must also
be fabricated. See installation instructions (para 411 ) for additional information.
(2) A sound attenuator is available for the conditioned air inlet and outlet connections on this air conditioner.
It must be ordered separately. See paragraph 4-70 for additional information.