TM9-4120-370-14
TO35E9-229-1
4-18. FABRIC COVER - Continued.
b. Cleaning
(1) Wipe clean with rag and mild detergent solution.
(2) Thoroughly rinse with fresh water and dry.
c.
Lubrication
(1) Snaps may be lubricated with silicone type lubricant or a wax stick.
(2) Turnbutton fasteners maybe lubricated with silicone type lubricant or light oil.
d. Inspection/Repair
(1) Inspect for rips, cuts, tears, or punctures in the fabric.
(2) Inspect for damaged, loose, or missing eyelets and snap fasteners.
(3) Refer repair/replacement to direct support maintenance.
e.
Installation
(1) Aline eyelets to casing mounting holes.
(2) Using screwdriver, secure fabric cover with twenty-six screws and flat washers and four lock washers.
(3) If the air conditioner is to be returned to normal operation, open the snap fasteners, roll up the back flap,
and secure it with the stowing straps and turnbutton fasteners.
NOTE
If the air conditioner installation requires removal of cover, reinstall the mounting screws
and washers. This will protect the threads in the casing and prevent air leaks.
Figure 4-24. CBR Cover
Removal
a.
(1) Using screwdriver, remove four screws and flat washers.
(2) Remove cover.
