TM9-4120-370-14
TO35E9-229-1
(4) Tilt top of lower front panel out and lift panel up to remove.
(5) Using screwdriver, remove ten screws and lock washers from junction box cover.
Figure 4-63. Junction Box Cover
(6) Remove junction box cover.
b. Reassemble
(1) Place junction box cover on box and aline holes.
(2) Using screwdriver, secure junction box cover with ten screws and lock washers.
(3) Insert bottom flange of lower front panel inside the lip of the cabinet base.
(4) Push top of lower front panel into position.
(5) Using screwdriver, secure lower front panel with five captive panel screws.
(6) Connect power cable,
(7) Turn on power at power source,
