TM 9-4120-370-14
TO 35E9-229-1
6-4.
DAMPER PARTS (MODELS F36T-2S AND F36T4-2SB ONLY) - Continued.
a.
Inspection
(1) Check for loose, missing or broken parts. Repair loose parts and replace missing or broken parts.
(2) Check that damper blades are not bent, dented, or otherwise damaged, Straighten or replace damaged
blades.
b.
Removal
(1) Using wrenches remove the two shoulder bolts and four nuts that attach the damper links to the actuating
cylinder.
(2) The condenser fan outlet scroll and damper assembly (riveted to housing) must be removed, use a drill
bit slightly smaller than the body diameter of the rivet. Drill 74 rivets (typical each side) out of scroll and
housing, Remove scroll and damper assembly.
(3) Straighten the prongs on top of the damper vanes and carefully flex the damper blades enough to free them
from the bearings. Remove damper blades and bearings.
(4) Use a drill bit slightly smaller than the diameter of the rivets if disassembly of the linkage parts is required.
