TM 9-4120-371-14
b. Inspection
(1) Check that panel is not bent, cracked, or punctured.
(2) Check that gasket is not torn, loose, or missing.
(3) Check that information is readable.
(4) Refer all repairs to direct support maintenance.
c. Installation
(1) Aline captive studs with casing fasteners.
(2) Using screwdriver, secure access panel with two captive turnlock fastener studs.
Followon procedure: Connect power.
4-32, FILTER (RADIO FREQUENCY) MOUNTING PLATE
WARNING
Disconnect input power to the air conditioner before performing any internal maintenance.
Voltages used can KILL. Shutting the unit off at the control panel does not disconnect unit
power.
Preliminary procedure: Turn unit power off at power source. If there is a chance that it will be turned on, also
disconnect power cable to air conditioner.
a. Removal
(1) Using screwdriver, remove eight outermost screws from filter mounting plate.
(2) Slip plate and filter out and suppot filter.
(3) Using screwdriver, remove six screws from mounting plate and filter.
(4) Remove mounting plate.