TM 9-4120-371-14
(5)
Using screwdriver, remove four screws and remove two side panel inserts.
While handling coils, wear gloves to avoid cuts and reduce fin damage on the coil.
(6) Using screwdriver, remove eight screws and packing with retainers while supporting the
evaporator coil.
(7) Using screwdriver, remove two screws that attach mist eliminator brackets to coil.
(8) Remove mist eliminator brackets.
(9) Using screwdriver, remove three screws and flat washers from each of the evaporator coil
brackets.
(10) Slip evaporator coil brackets up and out of unit.
(11) Using screwdriver, remove screw, lock washer, flat washer, and clamp from distributor lines.
(12) Using gloves to protect your hands and coil fins, carefully lift the coil up and out of the unit.
