TM 9-4120-378-14
4.16 CANVAS COVER- continued
Remarks
Location/Item
Action
inspection and
CIeaning
-Continued
Clean parts in a well-ventilated area.
Avoid inhalation of solvent fumes and
prolonged exposure of skin to cleaning
solvent. Wash exposed skin thoroughly.
Dry cleaning solvent, P-D-680, used to
clean parts, is potentially dangerous to
personnel and property. Avoid repeated
and prolonged skin contact. Do not use
near open flame or excessive heat.
Flash point of solvent is 100 F to 138 F
(38C to 59C).
b. Inspect for stains, clean with dry cleaning solvent
Do not roll up immediately af-
:er cleaning with solvent.
(Item 18, Appendix E) and lint free cloth.
Spread canvas cover out flat
Until it is dry.
Installation
Secure with three screws (1), three Iockwashers (2),
and three flat washers (3) to rear of top rear cover,
roll up and tie.
4-22
