TM 9-4120-378-14
Remarks
Action
Location/Item
c. Remove bearing plate (11 ).
disassembly
Continued
Remove louver blades (12) and bearings (13)
d
from louver assembly frame (8).
Condenser
Louver
a.
Replace damaged louver blades, bearing, lever,
Repair and
or insulation. -
CIean
Straighten or replace bent frame.
b.
Clean with dry cleaning solvent.
c.
Clean parts in a well-ventilated area.
Avoid inhalation of solvent fumes and
prolonged exposure of skin to cleaning
solvent. Wash exposed skin thor-
oughly.
Dry cleaning solvent,
P-D-680, used to clean parts, is poten-
tially dangerous to personnel and
property. Avoid repeated and pro-
longed skin contact. Do not use near
open flame or excessive heat. Flash
point of solvent is 100 OF to 138F
(38C to 58C).
Condenser
Louver
a.
Install bearings (13) and louver blades (12) into
Assembly
louver assembly frame (8).
Install bearing plate (11 ) to louver assembly
b.
frame (8) by securing two screws (1 O).
..
c
Install five push nuts (9).
Condenser
Louver
Place condenser louver assembly (8) in housing.
a.
Installation
Install top and bottom screws (6) and washers [7)
b.
.,
.,
finger tight.
4-32
