TM 9-4120-378-14
5.27 COMPRESSOR. - Continued
Location/Item
Action
Remarks
Removal
NOTE
Continued
The compressor is mounted to the
housing by bolts inserted from the in-
side of the unit, attaching to locknuts
which are inserted from the underside
of the unit. Thus, it is necessary that
the entire air conditioner be raised and
placed on blocks of sufficient height to
allow for removal of the locknuts below
the base.
Loosen eight screws (1) and open four access cov-
ers (2) on bottom of unit.
Remove four screws (3), eight flat washers (5) and
four self-locking nuts (4) securing compressor (7)
to housing.
Remove compressor wiring harness.
Compressor weighs as much as 55 Ibs
(25.0 kg) and could cause injury to per-
sonnel and damage to equipment if
not handled properly while removing
from unit.
Remove compressor horizontally through con-
denser coil opening at rear of unit.
Remove eight resilient mounts (6).
Debraze tubing assemblies from compressor at
connections (X).
13208E4182-5 COMPRESSOR
13208E418210 COMPRESSOR
5-80
