ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
4.46
EVAPORATOR MOTOR AND HOUSING ASSEMBLY. - Continued.
INSTALLATION - Continued
b. While holding cross-frame (1), slide motor and housing assembly (6) into rear mounting bolts (2) and secure with
front motor mounting bolts (15) and flat washers (16).
c Tighten two rear mounting bolts (2)
d Position cross-frame (1) over the four rubber shock mounts (17) and secure with four bolts (5), locknuts (3), and
eight flat washers (4)
e Feed wares (8) into J-box (7), reconnect and remove tags
f. Position J-box cover (14) on J-box (7) and secure with two screws (13).
g Position cable tie-down (12) on housing assembly (6) and secure with flat washer (11), lockwasher (10), and
screw (9).
FOLLOW ON PROCEDURES
b. Connect air conditioner input power at source.
4-98