TM 9-4120-385-14
22. Tag and disconnect leads from (K1 and K2) (See Figure 4-28).
23. Tag and disconnect leads from E2 by removing screw, two flat washers,
lockwasher, and nut.
24. Remove connectors P4 and P10.
25. Remove connectors J4 and J10 by removing four screws and nuts each.
26. Tag and disconnect leads to TB1 by removing 16 screws and lockwashers.
27. Tag and disconnect leads to TB2 by removing six screws and lockwashers.
28. Tag and disconnect lead to CB terminal C by removing quick disconnects.
29. Remove wiring harness from unit.
30. Cut tie straps as required.
