TM 9-4120-388-14
b. Cleaning
This task consists of:
a. Removal
c. Inspection
d. Installation
INITIAL SET-UP:
Condition:
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL. Shutting the unit off at the control panel
does not disconnect unit power.
a. Removal. Lift mist eliminator straight up and out of guides.
b . Cleaning.
(1) Wash in mild detergent and water solution.
(2) Rinse thoroughly in dear water.
(3) Shake out excess water prior to installation.
Inspection.
c.
(1) Check for punctures, cuts, and other visible damage.
(2) Check for packed or mashed areas that would block air flow.
(3) Replace if found bad.
4-65