TM 9-4120-399-14
WARNING
Whenever possible, input power supply to equipment must be
off before beginning work. Take particular care to ground every
capacitor likely to hold a dangerous charge. When working inside,
after power has been turned off, always ground every part before
touching it. Be careful not to contact high voltage connections of
208 volts ac input when installing or operating this equipment.
Whenever nature of operation permits, keep one hand away from
equipment to reduce hazard to current flowing through vital organs
of body. Do Not operate equipment without all guards, louvers, and
covers in place and tightly secured.
a.
Removal.
(1) Remove two screws (1), two flat washers (2), two lock nuts (3), and thermostat (4)
from bracket (5).
(2) Remove screw (6) and clamp (7).
(3) Tag and disconnect thermostat wires from terminal blobvk TB3.
(4) Remove thermostat (4) from unit.
