TM 9-4120-399-14
b. T e s t .
(1) Using an ohmmeter set on lowest OHMS reading, check each relay for discontinuity
across terminals L1 and T1, L2 and T2, and L3 and T3.
(2) Replace any relay found to be continuous across any set of terminals.
c. Installation.
(1) Install relays (1), (2), (3), (4), and nine screws (5).
(2) Connect all wires to relay (1), relay (2), relay (3), and relay (4) and remove tags.
(3) Install junction box assembly (See para. 4-33).
Figure 4-25. Relays (K1, K6, K7, K8, and K9).
