TM 9-4120-399-14
(1) Tag and disconnect all remaining wires in junction box (1).
(2) Remove six screws (2), six lock washers (3), and six flat washers (4) holding
mounting panel (5) into junction box (1).
(3) Remove two screws (6), two lock washers (7), and terminal block (8).
(4) Remove two screws (9), two lock washers (10), and terminal block (11).
(5) Remove three connectors (12) from junction box (1).
(6) Remove ground bolt (13), five washers (14), and three nuts (15) from junction box
(1).