TM 9-4120-399-14
5-16. RECEIVER.
This Task Covers:
b. Installation
a. Removal
Initial Setup:
Tools Required
Tool kit, Refrigeration
Material's Required
None
Equipment Condition
Air conditioner shut down and cool.
Front panel removed (See para, 4-20).
Refrigeration system discharged (See para. 5-7).
Fusible plug removed (See para. 5-17).
Purge the system with dry nitrogen (See para. 5-8).
Debraze tube connections (See para. 5-9).
a. Removal.
WARNING
DANGEROUS CHEMICAL
(R22)
is used in this equipment.
o r severe injury may result if personnel fail to observe safety
precautions. Use great care to avoid contact with liquid refrigerant gas
being discharged under pressure. Sudden and irreversible tissue damage
can result from freezing. Wear thermal protective gloves and a face
protector or goggles in any situation where skin-eye-contact is possible.
Prevent contact of refrigerant gas with flame or hot surfaces. Heat
causes refrigerant to break down and form carbonyl chloride (phosgene),
a highly poisonous and corrosive gas.
(1) Remove screw (1), lock washer (2), and nut (3) from clamp (4).
(2) Remove receiver (5).
(5-31
blank)/5-32
