TM9-4120-400-14
FABRIC
COVER.
This task covers:
a. Removal
b. Cleaning
c. Replacement
d. Installation
INITIAL SETUP
Tools
Materials/Parts
Refrigeration Unit Service Tool Kit
Fabric Cover
Scrub Brush
Detergent
REMOVAL
Figure 4-7. Fabric Cover
1. Unsnap four snap fasteners (2).
2. Remove three sets of screws (3), lock washers (4), and flat washers(5). Lift fabric cover (1) from unit.
CLEANING
Wash the fabric rover using a solution of fresh water and a mild detergent. A soft scrubbing brush may be
used to remove caked deposits. Thoroughly rinse with fresh water and air dry.
REPLACEMENT
Check fabric cover for cuts, tears, and damaged or missing screw eyelets or snap fasteners. Replace
cover if damaged.
INSTALLATION
1. Secure fabric cover (1) to the unit with three sets of screws (3), lock washers (4), and flat washers (5).
2. If unit is to be put back into service, roll cover up and tie in place.
3. If unit is to be stored or shut down for an extended period, roll cover down and secure snaps (2).
4-38