TM9-4120-400-14
CONDENSER FAN MOTOR REPAIR. - continued
5-8.
Figure 5-6. Condenser Fan Motor Assembly, Howell Electric Motor Division of SFM Corp., Single Phase Motor,
Model 70N4-4886.
a. To replace connector (1):
(1) Loosen cable clamp (2).
(2) Tag and unsolder leads.
(3) Remove old connector (1).
(4) See wiring diagram figure 4-4 and tags and solder leads to new connector (1). Remove tags.
(5) Secure cable clamp (2).
(1) Match mark stator (3) and both end shields (4 and 5) to ease reassembly.
(2) Remove four thru bolts (6), lock washers (7), and square nuts (8) from end shields (4 and 5).
(3) Carefully separate end shields (4 and 5) from stator (3). Using a brass or plastic bar and hammer tap
opposite sides, top and bottom in alternating sequence to break end shields loose.
5-19
