Figure 4-43. Condenser Fan, Motor, and Housing

TM9-4120-401-14

4-46.

CONDENSER FAN, MOTOR, AND HOUSING. - continued

Figure 4-43. Condenser Fan, Motor, and Housing

(2) Use a multimeter set to measure resistance and check continuity at P10 (4) between pins 1 and 2, 1

and 3, and 2 and 3. If no continuity is indicated, replace motor.

(3) Use a multimeter set to measure resistance and check continuity at P7 (3) between pins 1 and 2. If no

continuity is indicated, replace motor.

(4) Use a multimeter set to measure resistance and check continuity at P10 (4) and P7 (3) between P10

pin 4 and all other pins. If continuity is indicated, replace motor.

(5) If motor (2) tests good, connect motor connector plugs (3) and (4) using tags and wiring diagram