TM 9-4120-402-14
4-26. ELECTRICAL WIRING REPAIR - GENERAL. - continued
(4) Crimping Terminals.
To install a terminal on the end of a wire, strip 1/4 1/2 inch (0.6 1.3 cm) of insulation from the end of the wire, apply a
one-inch (2.5 cm) piece of heat-shrink tubing (if the terminals are of the uninsulated type). Insert wire-end into the
shank of the terminal. Crimp the shank and install heat-shrink tubing, if necessary.
NOTE
Preferred repair methods consist of replacing wires, terminals, connectors, etc.,
rather than splicing wires, bending ends to form terminals, and other make-shift
procedures, although the latter may be appropriate for emergency field repairs.
(5) Determine the proper size and length of wire, or the terminal, or connector to be used for replacement by referring to
Table 4-4. WIRE LIST
Termination
Termination
AWG
Length
Wire
From
Terminal Type
To
Terminal Type
Size
IN.
CM
* Use (97403) 13229E4281-1
Plug, Contact, Housing
(97403) 13229E4279
Pin, Universal Contact
** Use (97403) 13229E4181-3
Connector, Pin Housing
(97403) 13229E4272 Pin,
Connector
*** Use (97403) 13229E4181-3
Connector, Pin Housing
(97403) 13229E4273
Socket, Connector
P7-1
*
P14-A
MS3106R20-15S
12
30.0
76.2
P7-2
*
P14-B
MS3106R20-15S
12
30.0
76.2
P7-3
*
P14-C
MS3106R20-15S
12
30.0
76.2
P8-1
**
TB1-1
MS25036-153
16
48.5
123.2
P8-2
**
TB1-2
MS25036-153
16
48.5
123.2
P8-3
**
CR4-1
13216E6191-2
16
26.0
66.1
P8-4
**
CR4-4
13216E6191-2
16
26.0
66.1
P8-5
**
P14-D
MS3106R20-15S
16
30.0
76.2
P8-6
**
P14-E
MS3106R20-15S
16
30.0
76.2
P8-7
***
E4
MS25036-154
16
28.0
71.2
P14-F
MS3106R20-15S
TB1-1
MS25036-153
16
58.5
148.6
P14-G
MS3106R20-15S
TB1-3
MS25036-153
16
59.6
151.5
4-84