TM 9-4120-403-14
4-20. CONDENSER COIL GUARD
This task covers:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP
Tools
Tool Kit, Refrigeration
(Appendix B item 1)
Equipment Conditions:
Fabric Cover Removed (para 4-11)
Figure 4-12. Condenser Coil Guard
Removal
Remove eight screws, flat washers and condenser coil guard.
Inspection
Check that guard is not bent, cracked, or otherwise damaged. Replace guard if damaged.
Installation
Secure guard assembly to casing with eight screws and flat washers.
Follow-on procedure: Connect power cord.
4-41
