TM 9-4120-403-14
(8)
Attach two core end fittings and tighten screws.
(9)
Secure two clamps with two screws and washers.
(10) Secure cable to rear panel with lockwasher and nut and install knob.
(11) Perform adjustment procedure
Follow-on procedure: Install lower panel. (See para 4-17.)
4-35. COMPRESSOR CIRCUIT BREAKER (CB)
This task covers:
a. Inspection
c.
Removal
b. Test
d.
Installation
INITIAL SETUP
Tools
Tool Kit, Refrigeration
(Appendix B item 1)
Materials/Parts
Equipment Conditions
Junction Box Removed (para 4-32)
Inspection
(1)
Loosen four panel fastener screws and junction box cover.
(2) Check that mounting hardware, circuit breaker cover, actuator arm, and circuit breaker are
in place and secure.
(3) Check that wire leads are properly connected to circuit breaker and are not damaged. See wiring diagram
(4)
Check circuit breaker for signs of overheating or other visible damage. Replace if damaged.
4-79
