TM 9-4120-403-14
Repair
(1)
See paragraph 4-47 for general wire repair instructions.
(2)
See table 4-3 (Wire List) for wire lengths and terminal information when individual wires are replaced.
Installation
(1)
Position harnesses in junction box.
(2)
See tags and wiring diagram (fig. 4-43) and reconnect leads.
(3)
Remove tags.
(4)
Secure J4 and J10 connectors and gaskets, with four each screws and lockuts.
n
(5)
Secure junction box cover with four captive panel fastener screws
Follow-on procedure:
(1)
Install terminal boards. (See para 4-43.)
(2)
Install fuse blocks and fuses. (See para 4-42.)
(3)
Install transformer. (See para 4-41.)
(4)
Install K9 relay. (See para 4-39.)
(5)
Install K6 relay. (See para 4-38.)
(6)
Install K2 relay. (See para 4-37.)
(7)
Install K1 relay. (See para 4-36.)
(8)
Install circuit breaker. (See para 4-35.)
(9)
Install rectifier. (See para 4-33.)
(10) Install junction box. (See para 4-32.).
4-103
