TM 9-4120-403-14
Installation
(1) See tags and wiring diagram (fig 4-43) and connect wire leads. Remove tags.
(2) Secure relay to bracket with screw.
(3) Secure bracket to casing with four screws.
(4) Install L1 coil assembly and data plate and secure to L1 valve plunger with nut.
Follow-on procedure:
Install junction box. (See para 4-32.)
4-53. FAN RELAY (K7)
This task covers:
a. Inspection
b. Test
INITIAL SETUP
Tools
Tool Kit, Refrigeration
(Appendix B item 1)
Equipment Conditions:
Top Panel Removed (para 4-32)
Inspection
(1) Check for loose, corroded, missing, or broken terminal connections.
(2) Check relay for cracks, evidence of overheating, and any other visible damage. Notify your supervisor if
damaged.
4-132
